The F-type connector is typically used for 75-ohm cable distribution systems, especially for CATV (Community Antenna Television) and broadcasting television networks. It can be used in situations where impedance matching is required, as well as in non-matching situations. Its features include threaded connections, easy insertion, and affordable pricing.
| Product Specifications | |||
| Product Specifications | Connector Impedance | 75 Ohm | |
| Frequency Range | DC ~ 2 GHz | ||
| Working Voltage | 170V | ||
| Dielectric Withstanding Voltage | 1000V | ||
| Insulation Resistance | ≥1000 MΩ | ||
| Center Contact Resistance | ≤6 mΩ | ||
| Outer Contact Resistance | ≤1 mΩ | ||
| VSWR | Straight≤1.2; Right Angle≤1.3 | ||
| Mating Cycles | ≥500 | ||
| Operating Temperature | -45℃~ 85℃ | ||
| Materials & Plating | Component | Material | Plating/Coating |
| Body | Brass | Nickel | |
| Pin contact | Brass | Gold | |
| Insulator | PTFE | - | |
| Product Specifications | |||
| Product Specifications | Connector Impedance | 75 Ohm | |
| Frequency Range | DC ~ 2 GHz | ||
| Working Voltage | 170V | ||
| Dielectric Withstanding Voltage | 1000V | ||
| Insulation Resistance | ≥1000 MΩ | ||
| Center Contact Resistance | ≤6 mΩ | ||
| Outer Contact Resistance | ≤1 mΩ | ||
| VSWR | Straight≤1.2; Right Angle≤1.3 | ||
| Mating Cycles | ≥500 | ||
| Operating Temperature | -45℃~ 85℃ | ||
| Materials & Plating | Component | Material | Plating/Coating |
| Body | Brass | Nickel | |
| Pin contact | Brass | Gold | |
| Insulator | PTFE | - | |