The UHF series is a type of connector that uses end-tooth engagement and does not have strict requirements for impedance matching. It generally performs well when designed for use up to 300 MHz. This product is particularly suitable for all civilian band communication systems, closed-circuit television, vehicle-mounted radio devices, ship-to-shore communications, landing and approach systems, and ground control equipment. Its characteristics include good vibration resistance, reliable connection, and stable performance.
| Product Specifications | |||
| Product Specifications | Connector Impedance | 50 Ohm | |
| Frequency Range | 0~300MHz | ||
| Working Voltage | 750V | ||
| Dielectric Withstanding Voltage | 2000V | ||
| Insulation Resistance | ≥1000 MΩ | ||
| Center Contact Resistance | ≤5 mΩ | ||
| Outer Contact Resistance | ≤5 mΩ | ||
| VSWR | ≤1.5 | ||
| Mating Cycles | ≥500 | ||
| Operating Temperature | -45℃~ 85℃ | ||
| Materials & Plating | Component | Material | Plating/Coating |
| Pin Contact | Brass | Gold | |
| Body | Brass | Tri-Alloy | |
| Insulators | PTFE | - | |
| Product Specifications | |||
| Product Specifications | Connector Impedance | 50 Ohm | |
| Frequency Range | 0~300MHz | ||
| Working Voltage | 750V | ||
| Dielectric Withstanding Voltage | 2000V | ||
| Insulation Resistance | ≥1000 MΩ | ||
| Center Contact Resistance | ≤5 mΩ | ||
| Outer Contact Resistance | ≤5 mΩ | ||
| VSWR | ≤1.5 | ||
| Mating Cycles | ≥500 | ||
| Operating Temperature | -45℃~ 85℃ | ||
| Materials & Plating | Component | Material | Plating/Coating |
| Pin Contact | Brass | Gold | |
| Body | Brass | Tri-Alloy | |
| Insulators | PTFE | - | |