The FME series products feature an M8×0.75 connection thread, which is also known as the SAP connector. It is designed for use in electronic instruments, mobile communications, and antenna systems, specifically for signal transmission connections of RF coaxial cables at a frequency of up to 3 GHz.
| Product Specifications | |||
| Product Specifications | Connector Impedance | 50 Ohm | |
| Frequency Range | DC ~ 3 GHz | ||
| Working Voltage | 500V | ||
| Dielectric Withstanding Voltage | 1000V | ||
| Insulation Resistance | ≥5000 MΩ | ||
| Center Contact Resistance | ≤10 mΩ | ||
| Outer Contact Resistance | ≤5 mΩ | ||
| VSWR | ≤1.25 | ||
| Operating Temperature | -45℃~ 85℃ | ||
| Materials & Plating | Component | Material | Plating/Coating |
| Body | Brass | Ni | |
| Insulator | PTFE | - | |
| Pin Contact | Brass | Au | |
| Coupling Nut | Beryllium-Copper | Ni | |
| Gasket | Silicone Rubber | - | |
| Ferrule | Annealed Copper | Ni | |
| Product Specifications | |||
| Product Specifications | Connector Impedance | 50 Ohm | |
| Frequency Range | DC ~ 3 GHz | ||
| Working Voltage | 500V | ||
| Dielectric Withstanding Voltage | 1000V | ||
| Insulation Resistance | ≥5000 MΩ | ||
| Center Contact Resistance | ≤10 mΩ | ||
| Outer Contact Resistance | ≤5 mΩ | ||
| VSWR | ≤1.25 | ||
| Operating Temperature | -45℃~ 85℃ | ||
| Materials & Plating | Component | Material | Plating/Coating |
| Body | Brass | Ni | |
| Insulator | PTFE | - | |
| Pin Contact | Brass | Au | |
| Coupling Nut | Beryllium-Copper | Ni | |
| Gasket | Silicone Rubber | - | |
| Ferrule | Annealed Copper | Ni | |